Why does the HID RKCL40 have both contact and contactless interfaces?

The dual interfaces serve two purposes: they provide a backup contact path if a card's contactless antenna is damaged, and they enable PIV + PIN on-card matching where the cardholder's PIN is verified directly on the chip via the contact interface for FIPS 201 Limited access.

What FIPS 201 access classes is the RKCL40 suitable for?

The pivCLASS RKCL40 meets FIPS 201 requirements for both Controlled and Limited access areas. For Exclusion access requiring biometric verification, use the HID pivCLASS Biometric Reader instead.

Can the RKCL40 dynamically switch authentication modes?

Yes. When used with a HID pivCLASS Authentication Module (PAM), the RKCL40 supports dynamically switchable authentication modes that can change based on time of day, day of week or threat level.

Which legacy proximity technologies does the RKCL40 support?

The RKCL40 reads HID Prox, AWID and EM4102 125 kHz proximity cards as well as 13.56 MHz HID iCLASS SE, iCLASS SR, standard iCLASS and SE for MIFARE Classic / DESFire EV1.

What is the warranty of the HID pivCLASS RKCL40?

HID Global provides a Lifetime warranty on the RKCL40 against defects in materials and workmanship.

HID pivCLASS RKCL40 Reader | FIPS 201 Contact + Contactless

9028006464
sales@csplsoftware.com sales@securityshells.com

HID pivCLASS RKCL40

HID pivCLASS RKCL40 - Access control system

HID pivCLASS RKCL40 contact, plus contactless dual interface biometric reader is suitable for use in security areas meeting the FIPS-201 criteria for both “Controlled” and “Limited” access. When used in conjunction with HID pivCLASS Authentication Module (PAM), the HID pivCLASS RKCL40 reader provides strong authentication ensuring that the card being presented is genuine; the data on the card has not been changed or manipulated; the card is not a copy or clone of another card; and the card has not been lost or stolen. When used in Card Authentication Key (CAK) mode, it supports reading any PIV-based card with a contactless interface and containing a CAK certificate. When used in PIV + PIN mode, the reader supports on-card-matching of a PIN, reading and validating the PIV Authentication Key certificate. pivCLASS RKCL40 is biometric Reader.

Key Features :

The dual interfaces of this biometric reader provide a backup for cases when a card’s contactless antenna is broken. The CAK certificate can also be read using the contact interface
Configurable to operate in either Wiegand or PAM mode
Dynamically switchable authentication modes
Supports reading legacy cards such as iCLASS, iCLASS SE and standard Prox

Specifications :

Typical Maximum Read Range* : Up to 2” for ISO14443 A cards
Dimensions : 4.8” X 6.1” x 1.2” (12.2 x 15.6 x 3.0 cm)
Legacy cards supported : Proximity : HID Prox, AWID and EM4102
13.56 MHz contactless smart cards supported
- PKI-based FIPS 201 credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC
- HID iCLASS SE, HID iCLASS SR, HID standard iCLASS, SE for HID MIFARE Classic, SE for HID MIFARE DESFire EV1
Supported outputs in Wiegand mode
- 40 bits
- 64 bits
- 75 bit GSA
- 128 bit UUIDs
- 200 bits full FASCN
Protocol
- Wiegand mode – Wiegand
- PAM mode – HID pivCLASS protocol or CoreStreet Reader Protocol
Warranty : LifeTime

Frequently Asked Questions – HID pivCLASS RKCL40 Reader

Quick answers to common questions about the HID pivCLASS RKCL40 Reader, its specifications, compatibility, and use in access control systems.

Q. Why does the HID RKCL40 have both contact and contactless interfaces?: The dual interfaces serve two purposes: they provide a backup contact path if a card's contactless antenna is damaged, and they enable PIV + PIN on-card matching where the cardholder's PIN is verified directly on the chip via the contact interface for FIPS 201 Limited access.
Q. What FIPS 201 access classes is the RKCL40 suitable for?: The pivCLASS RKCL40 meets FIPS 201 requirements for both Controlled and Limited access areas. For Exclusion access requiring biometric verification, use the HID pivCLASS Biometric Reader instead.
Q. Can the RKCL40 dynamically switch authentication modes?: Yes. When used with a HID pivCLASS Authentication Module (PAM), the RKCL40 supports dynamically switchable authentication modes that can change based on time of day, day of week or threat level.
Q. Which legacy proximity technologies does the RKCL40 support?: The RKCL40 reads HID Prox, AWID and EM4102 125 kHz proximity cards as well as 13.56 MHz HID iCLASS SE, iCLASS SR, standard iCLASS and SE for MIFARE Classic / DESFire EV1.
Q. What is the warranty of the HID pivCLASS RKCL40?: HID Global provides a Lifetime warranty on the RKCL40 against defects in materials and workmanship.