What is the HID VertX V300 used for?

The HID VertX V300 (P/N 70300) is an output control interface that connects to the VertX V1000 / EVO V1000 controller via RS-485. It provides 12 latching Form-C relays that can control up to 12 external devices such as HVAC equipment, elevator control panels, CCTV switchers and any logic input that accepts a simple contact closure.

How many devices can the V300 control?

The V300 contains 12 latching Form-C relays, allowing it to control up to 12 separate devices via contact-closure signals. For loads exceeding 2 A at 30 V DC, interposing relays should be installed between the V300 and the load.

How does the V300 connect to the rest of the access control system?

The V300 connects to the V1000 controller through a high-speed RS-485 network. The V1000 in turn communicates with the system host using TCP/IP over 10/100 Mbps Ethernet, with a single IP address serving up to 32 V-series interfaces. This minimises impact on the corporate LAN.

Can the V300 firmware be updated?

Yes. The V300 features on-board flash memory that allows program updates to be downloaded over the network without removing the unit, simplifying long-term maintenance and feature upgrades.

What power supply does the V300 require?

The HID VertX V300 operates on a 9 to 18 V DC supply at 100 mA. Each Form-C relay contact can directly handle up to 2 A at 30 V DC; higher loads require interposing relays.

Where can I buy the HID VertX V300 in India?

Cybernetics Software Pvt. Ltd., an HID NAS Partner based in Pune, Maharashtra, supplies the HID VertX V300 output control interface across India including Mumbai, Delhi, Bangalore and Kolkata, with integration support for VertX and VertX EVO access control systems.

HID VertX V300 Output Control Interface (70300) - 12 Relay Module

HID VertX V300 (P/N 70300) - Output Control Interface for V1000 / EVO V1000

HID VertX V300 Output Control Interface module with 12 Form-C relay outputs

The HID VertX V300 Output Control Interface connects 12 latching Form-C relays, allowing up to 12 devices to be controlled by simple contact closures - logic inputs for process equipment, HVAC and elevator control panels, CCTV switchers and similar systems. Loads exceeding 2 A at 30 V DC should be controlled via interposing relays.

The V300 features on-board flash memory, allowing program updates to be downloaded via the network. It connects to the V1000 through a high-speed RS-485 network. The V1000 communicates with the system host via industry-standard TCP/IP over 10/100 Mbps Ethernet or the Internet. This architecture minimises the impact on corporate LANs by using only one TCP/IP address for every 32 interfaces and by handling low-level transactions on the RS-485 network.

Cybernetics Software, an HID NAS Partner based in Pune, supplies the VertX V300 across India.

Key Features

V300 - Output Control Interface
Base Part Number: 70300
Contains 12 latching Form-C relays connecting up to 12 devices via simple contact closures
Connects to the V1000 / EVO V1000 controller via a high-speed RS-485 network
Off / Normal status programmable for each input point
Flash memory for downloading program updates over the network
Power supply: 9-18 V DC @ 100 mA
One TCP/IP address per 32 V-series interfaces - low LAN impact

Typical Applications

Process equipment control via logic inputs
HVAC and elevator control panel triggers
CCTV switcher and recorder triggering
Any device that accepts a contact-closure control signal

Frequently Asked Questions

What is the HID VertX V300 used for?: Providing 12 Form-C relay outputs (P/N 70300) for the VertX V1000 / EVO V1000 controller, driving HVAC, elevators, CCTV switchers and other equipment via contact closure.
How many devices can it control?: Up to 12 devices. Use interposing relays for loads exceeding 2 A at 30 V DC.
How does it connect to the system?: RS-485 to the V1000, which in turn uses TCP/IP to the host - one IP address per 32 V-series interfaces.
Can firmware be updated?: Yes - on-board flash memory accepts program updates over the network.
What power supply is needed?: 9 to 18 V DC at 100 mA.
Where can I buy it in India?: Cybernetics Software Pvt. Ltd., Pune (HID NAS Partner), supplies it across India including Mumbai, Delhi, Bangalore and Kolkata.

SUPPLIED BY

Cybernetics Software Pvt.Ltd.

Pune, Maharashtra

www.csplsoftware.com